What you will find here
Eight pages, each answering one fit or replacement question with the manufacturer's own numbers: frame size, headset, bottom bracket, thru axle, tires, inner tubes, cassettes and brake rotors.
- Medium or large? — The chart says I'm between sizes, and two 'mediums' are different. Which do I order?
- Which headset code fits my head tube? — I measured inside my head tube — 44.0mm at the upper end and 55.9mm at the lower end. What headset do I actually order?
- Which bottom bracket fits my frame and crank? — I bought a crank with a 28.99mm spindle. My frame's bottom bracket shell measures 41mm inside and 86mm wide. Which bottom bracket do I need?
- Will this tire fit my rim? — My rim says 622 x 19C and the tire says 700 x 35C. Will it fit?
- Which inner tube and valve do I need? — Which inner tube fits my tire, and what valve do I need for my rims?
- I lost my thru axle. What do I order? — I lost the thru axle out of my rear wheel. It's 12mm — what exactly do I order?
- Which tires fit your hookless rim, and at what pressure? — My new wheels are hookless. Which tires am I allowed to mount, and what's the highest pressure I can run?
- Is your tubeless sealant still good, and how much to add? — How do I know my tubeless sealant has dried out, and how much do I put back in?
- Why won't the cassette slide on? — Same number of speeds, but the new cassette won't go on the hub. What do I buy?
- Six-bolt rotor, splined hub: will it fit? — My hub has splines in the middle but my rotor has six bolt holes — and when I fitted a rotor it rubbed and the bolts kept loosening. What do I need and how does it go on?
- Will Your Rear Derailleur Take a Bigger Cassette? — I want to fit a bigger cassette. Will my rear derailleur actually handle it, or do I need a longer cage?
- Is It Just the Chain, or the Cassette Too? — My chain checker drops in at 0.75%. Do I just need a chain, or has it already chewed the cassette?
- Are Your Pads Worn, Your Rotor Worn, Or Both? — My disc brakes feel weak and the lever pulls closer to the bar than it used to. Are the pads worn out, the rotor worn out, or both?
How the pages are put together
Every figure is traced to a document we opened and read, and that document is listed at the bottom of the page with the date we read it. We prefer manufacturer specifications, published standards and official support documentation, and we quote them narrowly rather than generalizing beyond what they say.
When a manufacturer's own compatibility list or specification settles which part fits, the page names that part and links the list, so you can confirm your model is on it. Where the answer depends on your exact model and nobody publishes it in one place, we say so and point you at the specification field to look up.
Corrections
If something here is wrong, tell us and we will fix it. Write to hello@plumberranked.com with the page address and what the correct source says.
Who publishes this
Linea Holdings LLC, San Juan, Puerto Rico. Contact Dustin Goodwin. The same publisher runs a small group of reference sites, which is why the contact address does not carry this domain's name.
Corrections
If something here is wrong, write to us with the page address and what the correct source says. We will fix it.